Bolt on Head Loader in place of your existing blades and it will simulate the load of the blades without producing lift or cyclic effect. So now you can:-

· Set full throttle mixture quickly and accurately
· Check for glitches at full throttle
· Check tail and engine vibration effects on radio and gyro etc.
· Run as safely as a fixed wing aircraft for engine testing or any number of reasons

Headloaders are designed for 30 to 60 size helicopters with 4mm blade bolts. Made from quality high tensile strength alloy and tested to the highest of head speeds to ensure structural safety.
Each arm weighs less than a normal blade and is merely fly bar diameter, which reduces centrifugal force on the head to a minimum.
You will find that you are able to alter the head speed to your preference by changing the tail rotor pitch.

Spare whiffle balls can be purchased via any model shop that stock Head Loaders.

Distributed by:
R/C Models Distribution, Woodfield House, Woodfield Road, Altrincham, Cheshire, ENGLAND
Tel +44(0)161 929 0129, Fax +44(0)161 929 5984