pRAM-256
pRAM-256 neurocomputer with on-chip learning
   

General Description

The pRAM-256 is a versatile neural network processor with an on-chip learning unit. It offers the flexibility of a software solution with the speed of hardware. Connections between the pRAM neurons are reconfigurable which allows a network's architecture to be modified at any time. The pRAM-256 can complete one pass of the training process, training all 256 pRAMs, in less than 0.25 ms when operating at the maximum clock speed of 33 MHz. Because of the high number of pRAMs supported by the pRAM-256, a typical neural network can be built using a single pRAM Module. Several pRAM Modules can operate in parallel so that larger networks can be built. The pRAM-256 is fabricated using an advanced sub-micron gate array semi-custom technology from GEC Plessey Semiconductors. The use of a 68 pin PGA package allows a compact neural network to be built into existing and future systems. Interfaces to EISA and VME bus systems have been defined and the current PC-based board is capable of carrying up to 5 pRAM-256 chips




Email:

 

Data Sheets
Data sheets are available in PDF.

  • pRAM Data Sheet     (PDF)
  • pRAM Timing Data    (PDF)
  • pRAM Setup and Training Data   (PDF)

The data sheets are also available from the links below:

pRAM-256 data sheets
pRAM-256 timing and bus signals
pRAM-256 configuration examples

The information below contains some examples of pRAM-256 implementations. These examples are not exhaustive, but are to give some hints on building systems using the pRAM-256.
We are currently using the Lattice in-system programmable (isp) FPGAs to interface the pRAM-256 to external hardware. This allows both the interface and the neural network to be reconfigured without rewiring the circuit.

 

   
   

Applications of the pRAM
A PC interface card using the EISA bus has been designed for the pRAM-256 chip.
The board can be configured to support any possible pRAM network architecture by downloading a short connection-pointer file to an area of on-board RAM.
The spike output of the pRAM-256 can be converted to a mean firing frequency using the on-board FPGA which itself is in-system programmable. Different logic functions can be performed directly in hardware so long as they can be fitted into the FPGA.
Thus a single pRAM board can be used to investigate many different network topologies.